ABSTRACT
Polypropylene (PP) has poor oxygen barrier properties, therefore it is manufactured in a multi-layer structure with other plastics and metals, and has been widely used as a packaging material in various industries from food and beverage to pharmaceuticals. However, multi-layered packaging materials are generally low in recyclability and cause serious environmental pollution, therefore we have faced the challenge of improving the oxygen barrier performance as a uni-material. In this work, PP/nanoclay nanocomposites were prepared at nanoclay contents ranging from 0.8 to 6.4 wt% by the biaxial stretching method, performed through a sequential stretching method. It was observed that, as the draw ratio increased, the behavior of the agglomerates of the nanoclay located in the PP matrix changed and the nanoclay was dispersed along the second stretching direction. Oxygen barrier properties of PP/nanoclay nanocomposites are clearly improved due to this dispersion effect. As the biaxial stretching ratio and the content of nanoclay increased, the oxygen permeability value of the PP/nanoclay nanocomposite decreased to 43.5 cc·mm/m2·day·atm, which was reduced by about 64% compared to PP. Moreover, even when the relative humidity was increased from 0% to 90%, the oxygen permeability values remained almost the same without quality deterioration. Besides these properties, we also found that the mechanical and thermal properties were also improved. The biaxially-stretched PP/nanoclay nanocomposite fabricated in this study is a potential candidate for the replacement of the multi-layered packaging material used in the packaging fields.
ABSTRACT
INTRODUCTION: The current COVID-19 pandemic caused by the SARS-CoV-2 virus demands the development of strategies not only to detect or inactivate the virus, but to treat it (therapeutically and prophylactically). COVID-19 is not only a critical threat for the population with risk factors, but also generates a dramatic economic impact in terms of morbidity and the overall interruption of economic activities. AREAS COVERED: Advanced materials are the basis of several technologies that could diminish the impact of COVID-19: biosensors might allow early virus detection, nanosized vaccines are powerful agents that could prevent viral infections, and nanosystems with antiviral activity could bind the virus for inactivation or destruction upon application of an external stimulus. Herein all these methods are discussed under the light of cutting-edge technologies and the previously reported prototypes targeting enveloped viruses similar to SARS-CoV-2. This analysis was derived from an extensive scientific literature search (including pubmed) performed on April 2020. EXPERT OPINION: Perspectives on how biosensors, vaccines, and antiviral nanosystems can be implemented to fight COVID-19 are envisioned; identifying the approaches that can be implemented in the short term and those that deserve long term research to cope with respiratory viruses-related pandemics in the future.